Serving Jacksonville & Areas Up to 30 Mins Out · 24/7 Emergencies
Jax HVAC Co
HVAC Service · Jacksonville, FL

Ductless Mini-Split AC Installation & Repair

Zoned cooling and heating for garages, additions, and historic spaces. Locally owned and operated, servicing central AC, heat pumps, and furnace systems across Northeast Florida.

Service Details

Ideal For: Homeowners looking to add zoning control, cool home offices, or convert garage spaces

Response Time: Next-day installation consultations available

Pricing Concept: Flat-rate diagnostic with upfront quotes

Certifications: EPA-certified, NATE-trained

Home/Services/Mini-Split AC
Overview

Reliable, Professional HVAC Execution

Ductless mini-split systems are the perfect solution for cooling spaces without traditional ducts or adding extra zones to your home. We install premium multi-zone mini-splits from Mitsubishi, Daikin, and Gree. Since they require only a small 3-inch opening through the wall for linesets, they preserve your property's exterior integrity and lath plaster walls. They are exceptionally quiet (often below 20 dB) and offer high efficiency ratings up to 28 SEER2.

Our partnered contractors employ EPA-licensed and NATE-certified technicians. Partnered service vehicles are fully stocked with universal parts to ensure that we resolve your heating and cooling failures on the first visit, protecting your household comfort and peace of mind.

What is Included

  • Single and multi-zone indoor wall mount configuration
  • High-efficiency inverter compressors (up to 28 SEER2)
  • Extremely quiet operation (whisper-quiet 19 dB levels)
  • No ductwork losses (saving up to 30% in energy waste)
  • Wireless remote control and smart app integration
  • Minimal wall penetration (preserves historic plaster)
  • Complete system setup and manufacturer warranty registration
NATE certified technicians performing Ductless Mini-Split AC Installation & Repair
Technical Execution

How We Optimize Mini-Split AC Operations

Proper execution of ductless mini-split ac installation & repair is essential for providing zoned heating and cooling without attic duct thermal loss. When HVAC systems operate under heavy Florida summers or freezing winter mornings, minor mechanical discrepancies quickly lead to high energy draws, refrigerant leaks, or critical components failing.

To prevent these failures, our NATE-certified technicians carry state-of-the-art diagnostic instruments, including eccentric flaring tools, torque wrenches, and lineset vacuum units. This equipment allows us to verify system static pressure, electrical current draws, and temperatures splits to verify operations align with manufacturer design sheets.

We recommend scheduling this service on a complete seasonal checkup once a year basis. Keeping a tight preventative routine ensures your system satisfies warranty terms, reduces utility bills, and prevents sudden comfort losses.

Field Reports

Recent Mini-Split AC Case Studies

Real examples of our NATE-certified technicians performing mini-split ac work across Northeast Florida.

San MarcoMay 2026

Multi-Zone Ductless Mini-Split Installation in Garage Conversion on San Marco Blvd in San Marco

San Marco Blvd, San Marco

Property Type: elevated flood-zone home

The Problem: The homeowner wanted to convert their double garage into a comfortable home office and playroom, but routing central AC ducts from the attic was not feasible.

Discovery & Diagnostic: A heat load calculation recommended a 1.5-ton system. The garage had standard drywall but minimal roof insulation. We recommended a high-efficiency single-zone mini-split.

Resolution: We installed a Mitsubishi 18,000 BTU single-zone ductless mini-split system. We mounted the indoor air handler on the back wall and routed the lineset through a neat 3-inch hole protected by premium ivory vinyl cover. We vacuumed the system to 300 microns and charged it to subcooling targets.

Cooling85°F to 72°F in 15 Min
SystemSuper Quiet 21 dB
Zoned22.5 SEER2 Rating
Jacksonville BeachMay 2026

Ductless Mini-Split Master Bedroom Hot Spot Resolution on Ocean Front N in Jacksonville Beach

Ocean Front N, Jacksonville Beach

Property Type: coastal condominium with high salt-air exposure

The Problem: The master bedroom suite located at the far end of the house was always 5 degrees warmer than the rest of the rooms, keeping the homeowner awake at night.

Discovery & Diagnostic: The central AC duct run to the master bedroom was over 60 feet long, resulting in significant duct friction loss and low airflow volume. The homeowner decided to add independent zone control.

Resolution: We installed a quiet Daikin 9,000 BTU ductless heat pump system in the master bedroom. We routed the lineset down the exterior brick facade, sealed all wall penetrations, and connected it to a dedicated outdoor unit mounted on a rubber isolation pad.

BedroomPerfect 70°F (Adjustable)
Thermostat18% off Central AC load
Warranty12-Year Parts Warranty
AvondaleMay 2026

Ductless Mini-Split Master Bedroom Hot Spot Resolution on St Johns Ave in Avondale

St Johns Ave, Avondale

Property Type: cozy brick bungalow under the oak canopy

The Problem: The master bedroom suite located at the far end of the house was always 5 degrees warmer than the rest of the rooms, keeping the homeowner awake at night.

Discovery & Diagnostic: The central AC duct run to the master bedroom was over 60 feet long, resulting in significant duct friction loss and low airflow volume. The homeowner decided to add independent zone control.

Resolution: We installed a quiet Daikin 9,000 BTU ductless heat pump system in the master bedroom. We routed the lineset down the exterior brick facade, sealed all wall penetrations, and connected it to a dedicated outdoor unit mounted on a rubber isolation pad.

BedroomPerfect 70°F (Adjustable)
Thermostat18% off Central AC load
Warranty12-Year Parts Warranty
FAQ

Mini-Split AC FAQs

What is a ductless mini-split system?
A mini-split consists of an outdoor condenser connected to one or more indoor wall-mounted or ceiling-recessed blower units via a small copper lineset. They allow you to heat or cool individual rooms independently.
How many indoor units can connect to one outdoor condenser?
Multi-zone outdoor mini-split units can support up to 5 or 6 independent indoor wall, floor, or ceiling-cassette units, allowing complete zoned control.
Do mini-splits filter the air?
Yes. Every indoor wall unit features its own washable dust filter. Many models support advanced enzyme or electrostatic filters to capture pollen, pet dander, and small dust particles.
Can a mini-split heat my home during winter?
Yes. Most ductless mini-splits are heat pump systems, meaning they can reverse cycle to provide highly efficient heating down to sub-freezing temperatures.
How often should mini-split filters be cleaned?
We recommend washing the mesh filters inside the indoor units every 4 to 6 weeks, especially during peak cooling seasons, to maintain proper airflow and efficiency.
How long does it take to install a mini-split?
A single-zone mini-split system is typically installed in 3 to 5 hours. Multi-zone installations can take 1 to 2 days depending on line routing complexity.
Get Quote

Schedule your mini-split ac today

Fill out the form below to schedule a flat-rate diagnostic or system consultation. We respond immediately during business hours.

Loading request form...